How a Carpet Cleaner Works

Carpet cleaners are made to remove any deeply embedded stains and dirt in your carpets. The carpet cleaning machine is a good addition to any cleaning arsenal, particularly for the people who have a very busy household or those with very many carpets. A quality carpet cleaner will handle any ground-in dirt and stains and provide a deeper clean than vacuuming. So, how does the carpet cleaning machine function?

For the carpet cleaner to offer good results, you will have to spray your carpet with an effective cleaning solution and allow it to soak in for around 15 minutes. After that, you will have to run the carpet-cleaning machine, which pumps more water into the carpets, and its high-powered vacuum extracts the dirty soapy fluid from the carpets. Some carpet cleaners might boast components to preheat the water they use to rinse the carpets, but most do not.

How a Carpet Cleaner Works

To understand how the carpet cleaners work, you might need to learn something about the key parts. Here are the main parts of a carpet cleaner.

– The Pump

This is an important part of the carpet cleaner. It generates enough pressure into your carpets. The pressure levels range between 60 pounds per every square inch and 500psi.

– The VacuumHow a Carpet Cleaner Works

The purpose of a vacuum in the cleaner is to extract any dirty water and the cleaning solution from a carpet and empty it into the extraction tank. Each cleaner will feature a motor to drive the vacuum. For better results, go for the motor with two or three stages.

– The Solution Tanks

The purpose of a solution tank is to store the rinse water. Generally, the size of a solution tank ranges between 4.5 gallons and 17 gallons.

– Recovery Tank

After the vacuum extracts the dirt, water and cleaning chemicals from your carpets, the recovery tank will hold it. Generally, the size of a recovery tank ranges between 4.5 gallons and 15 gallons.

– Heating Unit

For perfect cleaning, the heating unit heats up the rinsing water to a temperature around 210 degrees F within three minutes. The heating elements might be single tanks, which use the solution tank to heat the water and the double inline elements that heat water continuously when exiting the cleaner.

– The Floor Wand

The size of the floor wand ranges between 10 inches and 12 inches. It comes with two jets – one for dispensing the fluid and the other to extract them. Manufacturers offer stair and upholstery wands too as an option. The cleaning solution hoses are available in variable lengths and you can custom order yours.

Conclusion

After you have completed the cleaning process, remember to unplug your cleaning machine, remove debris from its brushes and clean out its tank. To do that, use the user’s manual. It will serve you for many years if properly maintained. Knowing how a carpet cleaner works will help you ensure you clean your flooring as thoroughly as possible.

Leave a Reply

Your email address will not be published. Required fields are marked *